====== Printers ======

We can setup a **network printer** with an ethernet port to our lab and be able to print from every client PC. Printers without cable connection are not recommended. 

===== Printer Network Configuration =====
Our network printer has 2 possible ip configurations, **auto get ip from dhcp** or **static ip**

  - If it is already set up with a **static ip**, we need to change it to **auto get ip from dhcp**. It probably has an LCD screen with configuration, so we set ip to **auto** from its LCD screen.
  - [[en:software:lserver-admin:quickstart:startlserveradmin|We start LServerAdmin application]]
    - We go to menu **Services/ Basic Services / Dhcp Server / Configure / Static IPs / Add**.
    - On automatic scanning it shows up all the dynamic IPs of the PCs and devices connected to our network, with a description to help us locate the printer. We can verify the dynamic ip from our printer LCD screen settings or by opening a browser on another client PC typing the ip on the browser address. **We continue and select it ** and press **OK**.
    - On next dialog **Enter ip and host name of device** we type
      * IP Address : 192.168.10.**10**
      * Hostname : **myprinter** (whatever name we want)
      * MAC Address : (leave as is)
    - We shutdown and restart the printer to get the new ip. With have configured our printer to always get the same ip **192.168.10.10** from dhcp server.  
    * We have finished printer network configuration.

If we want to setup a 2nd printer we follow the same steps as above and can set ip as //192.168.10.11//

===== Printer installation on Windows =====

Our network printer can be **installed on windows virtual machine**, so that **we can print from any PC booting from network**.

  - [[en:software:lserver-admin:quickstart:connect2windowsvm|We connect to Windows virtual machine]] from proxmox **(not from a client PC)**. 
    * We connect with our personal network account with administrative priviledges on Windows.
  - We install the network printer on the windows virtual machine using **its installation software** (see[[en:software:lserver-admin:quickstart:installapptowinvm]])

==== User rights ====

After initial installation, all users have the ability to print. If we want to give **permissions to print only to teachers or individual users**, we do the following:
  - [[en:software:lserver-admin:quickstart:connect2windowsvm|We connect to Windows virtual machine]] from proxmox **(not from a client PC)**. 
    * We connect with our personal network account with administrative priviledges on Windows.
  - We go to **Control Panel / Hardware / Printers**. We click on the printer and select **Manage**
  - We right click on the printer and select **Properties** . and go to **Security**
  - To **remove permission for everyone to print** we select **Everyone** group and click on **Remove**.  
  - To give **permissions only on teachers**
    - We click on **Add**
    - If we don't want to show all users, we click on **Object types**, select only **Groups** and press OK.
    - On field //Locations// we leave our domain e.g. **SCH.LOCAL**
    - We click on **Advanced** and then **Find now**
    - We select the group **teachers**, click OK and again OK.
    - It should show group //SCH.LOCAL\teachers// on the list with **Group names or users** with permission to print.
  - We click on **Apply** and **ΟΚ** and leave from **Security** tab.

  * To give **permissions only to specific users**, we do the same procedure but in step 5 on **Object Types**, we select **Users** and from the list we select the users we want.

<note>We have setup ability to print on a specific **Windows installation**, where client PCs that boot from network connect. To give permissions to Linux or another Windows installation e.g. a local installation, we need to configure separately</note>